Pratham Bhatt

I have built a complex circuit using Arduino Uno, Breadboard, LED, 220Ω Resistor, Jumper Wires, USB Cable and it was nothing new for me but one thing which was that my Arduino was not working so i changed the connections and jumper wire 3 times then I got to know that it is not working.When the led worked without any defect continuosly without blinking therefore I got to know my project is working properly.

I have built a circuit which helped me learn that codes are something that can make most satisfying things or sequence or patterns not only the learning from it is physical but also ethical and when the leds did what I wanted to make them do I realized that it is working successfully

I have created just a simple circuit of loop which helped me revise all about coding and connecions of Breadboard along with through the writing code and when it looped correctly I realized that it worked successfully.

I have built a circuit using Arduino , breadboard and few jumper wires and waht everything I did were the same so didn't learned new something and leds blinked according to instructions

I have built a circuit with the help of IDE , UNO , Jumper wires and Breadboard which helped me revise that the connections of the breadboard , owrking of code and connections of Arduino Uno and when the leds blinked according to the instructions given in challenge I realized that the code is successfully working.

I have built a complex circuit which made me learn nothing new but this time not only this time but every time I do a project it has different code tis is the thing which I noticed I had to just join two more led but the connections of digital PWM changed and I thought I will also be able to connect the leds to 12 and 13 but the connections were showing different inputs so I decided to change the code so I rewrote it and changed it and it worked so ultimately it all about code and connections and when I did all the things and in both the condition when the blinked as per precautions I got to know that project had been completed finally which taught me a new lesson today.

I've built a circuit which helped me learn about that the resistors have colour codes according to their ovum till know I was thinking that tis is just a for show or to make it colour full but i learned about colour codes and when all the four leds were blinkinf as per the instuctions given I realized that it is working perfectly.This project is built with thte help of Arduino Uno , resistors, jumper wires and breadboard along with the app used for coding known as IDE and Led.

I have built a complex circuit which helped me learn to do connection properly and check it once it is connected as when i started it or powered it for the first time it didin't worked then i tried again so only three of them worked so i thought that let me jus share only three photos sir will get to know nothing and wil think that as there were only three photo option he might have done it but pasted only three but this project taught me sincerity and to do work roperly and when my all the 8 leds blinked on affter other at an equal interval without fail.

i have built a simple circuit which helped me to create a project of four chasing led and made me learn the internal connection of breadboard adn writing of code and when all the four led bliked without any failure according to the instruction so i realized that the project has been working successfully.

I have built nothing but just a simple circuit and I haven'nt ade changes uin it just added a resistor and conncted a port so i didint learn something new by this project just the code was modified which made me revise about code and when led blinked properly the project was completed.

I have built a circuit which was really fascinating and also intresting because it was newer than old and i have seen its examples in my surroundings and i wondered how would it was working but this project made help out of my curiosity and what i learned was that we can do or make really attractive and creative patterns using code and led not only that but it also made learn how to code and how resistor works along when the both leds blinked at an equal interval of 0.5 sec according to the instructions of a challenge i realized that I have successfully comoleted my Project.

I've built an circuit with the help of an arduino uno , braedboard and jumper wires and coded the arduino with an app known as arduino IDE. This time I learnt something new was that the photo which has been uploaded is directly uploaded from the laptop camera instead of what i used to do was that I took someone's phone thaen click photo the share it on my email then downloaded it and then use to upload the photo and from the project whch i did it helped me revise about the app's all tools and when both the led blinked according to the instruction of the challege 10 as written in the slides I got to know tht my project ha sbeen completed.

I have built a custom circuit with the help Arduino Uno , LED , Breadboard and Arduino IDE which taught me about code variations we can and how fascinating we can make the project and the automatic room freshner which sprays the freshner into our atmosphere at specific intervals and when the led blinked according to instruction i got to know that it has been successfully completed.

I built nothing new but the same circuit but the thing which I got to know or learn was making a new code to blink my led faster than the last project as to match the instructions of the challenge 8 and when both led blinked faster than the last project I got to know that my project is completed.

I have created a simple circuit with the help of UNO Breadboard and jumper wires along with the help of IDE and that made me learn how to upload and verify a code in IDE and i got to know that when my project got completed when led blinked successfully with and delay of 1000 and blink per sec.

I've built a circuit on breadboard of blinking 8 leds at a time with the help of Arduino uno and jumper wires this made me help that i go a quick recap on connections and power rails on Arduino and breadboard and i got to know that when my leds blinked at a time all together.

I've built a circuit of blinking 5 Led on a breadboard with the help of Arduino Uno and jumper wires and this project helped me learn about the breadboard's power rails inter connection and when my all the 5 led blinked properly I got to know that my circuit is properly working.

I've built circuit with the help of Arduino Uno , Breadboard , Jumper wires and Led which helped me learn that when Arduino is powered we don't have tp press the reset button it automatically starts blinking and i got to know when my project is completed when the all four blinked without pressing the reset button.

I've built a circuit which shows that the led is connected to breadboard and breadboard is getting power on its power rail positive and negative where led is connected . I learnt that the whole power rail is vertically inter connected and rails from A to J are horizontally connected to each other. I got to know that when my both the led blinked on the breadboard successfully my project has been completed.

I've built a circuit which shows that the led is connected to breadboard and breadboard is getting power on its power rail positive and negative where led is connected . i learnt that the whole power rail is vertically inter connected and rails from A to J are horizontally connected to each other. I got to know that when my led blinked on the breadboard successfully my project has been completed.

I have just built a simple circuit which helped me learn about Arduino Uno pins and simple basics of connection and I got to know that when my led blinked I've completed my project.