Prerna Makwana

I learned how to detect and measure the distance of objects using an ultrasonic sensor

I learned how to use an ultrasonic sensor to detect the distance of objects and apply it to a simple parking assistance system

I learned how to measure distance accurately using an ultrasonic sensor

I learned how to use an LDR and adjust the light sensitivity to control an LED automatically

I learned how to use an LDR sensor to detect light levels and automatically control an LED

I learned how to use an LDR sensor to detect changes in light and understand how sensors can provide input to an Arduino

I learned how to control LEDs in different patterns and sequences using Arduino programming

I learned how to mix different colors using an RGB LED by controlling its red, green, and blue components

I learned how to use a potentiometer to select and control LEDs using Arduino

I learned how to read potentiometer values and use them as analog input to control Arduino projects

I learned how to control the blinking speed of LED by changing the delay time in Arduino

I learned how to control LED brightness using Arduino and Potentiometer

I learned how to use a push button as an input and control a buzzer as an output using Arduino UNO

I learned how to connect push button on bread board and I improved my knowledge of push button

I learned how a push button controls an LED by opening and closing a circuit, I also improved my breadboard wiring skills

I learned how to connect an LED to the Arduino's 5V and GND pins and make it glow continuously without writing any code.

I learned how to create creative LED lighting effects

I learned how to create an alternate LED blinking pattern

I learned how to create a forward and reverse LED pattern

I learned how to create a progressive LED pattern and control multiple LEDs using Arduino programming.

I LEARNED HOW TO WORK ON LED THROUGH PATTERN

I LEARNED HOW TO CONNECT LEDS AND JUMPER WIRES I ARDUINO AND CREATE DIFFERENT ON, OFF, OFF,OFF PATTERN

I learned how to connect and control EIGHT LEDs using an Arduino Nano and breadboard, I also learned how to create a running-light effect by programming the LEDs to turn ON one after another

I learned how to control four LEDs independently and create a running-light sequence using Arduino

I learned how to control three LEDs using three different Arduino digital pins and create a continuous LED chase sequence. I also learned how to use loops and arrays to control multiple LEDs efficiently

I learned how to connect two LEDs and make them blink alternately using Arduino.

I learned how to make the LED stay ON for 0.5 seconds and OFF for 1 second by changing the delay values.

I learned how to change the LED's blinking pattern by keeping it ON for 3 seconds and OFF for 1 second.

I learned how to control the speed of an LED's blinking by changing the value in the delay() function. I also learned how to connect LEDs on a breadboard using jumper wires.

I learned how to slow down the LED blinking speed by increasing the value in the delay() function.

I learned how to blink multiple LEDs by controlling different digital pins with code

I learned how to explore the layout of a breadboard and understand how its rows and columns are connected for building circuits.

I learned how to connect multiple LEDs on a breadboard using jumper wires. I also learned how to control and blink multiple LEDs using Arduino digital pins.

I learned how to connect two LEDs on a breadboard using jumper wires and Arduino. I also learned how to control two LEDs independently using different digital pins.

I learned how to connect an LED to a breadboard using jumper wires and connect it to an Arduino. I also learned how to upload a program to make the external LED blink.

I learned the basic structure of an Arduino program using `setup()` and `loop()`. I also learned how to control an LED by turning it ON and OFF using `digital Write()` and `delay()`.